Servo Motor

SD700 Series Servo Drives

• SD700 PA, SD700 SA, SD700 CA SD700 EA, SD700 MA, SD700 LA, SD700 FA;

• 3KHz speed loop response bandwidth;

• 17bit, 23bit, 24bit encoder;

• Modbus, CANopen, EtherCAT, Profinet, MechatroLink II, MechatroLink III;

• ECAM; Full closed loop model; Low frequency vibration suppression;

• Robust control; Auto set notch filter; AI setting;

• Speed observer; STO (optional);

• Voltage: 1 Phase 220V, 3 Phase 220V - 400V;

• Power: 0.1kW - 55kW, customized up to 250kW;

MSK071D-0450-NN-M3-UG0-NNNN is part of the MSK Synchronous Motors Series by Indramat Motors.

HCS02.1E-W0070-A-03-NNNN by Rexroth, Indramat, Bosch is a compact converter in the HCS Series. The HCS02.1E-W0070-A-03-NNNN features a Maximum Current of 70 A and a Mains Connection Voltage of AC 200 to 500 V + or - 10%. This Converter has a Infeeding Power Supply and features an IP 20 Degree of Protection

The converters of the IndraDrive C integrate inverter and power supply in one unit. The compact construction contains additional mains connection components, making it particularly suitable for single-axis applications

Continuous output up to 11 kW

Extremely high overload capacity

Continuous current up to 28 A

Can be connected to inverters for cost-effective solutions

Direct mains connection from 200 V to 500 V

Details:

• Drive supply voltage : 230 V single phase
• Rated output : 0.4 kW
• Rated speed : 3000 Rpm
• Rated torque : 1.3 Nm
• Peak torque : 3.8 Nm
• Encoder type : Absolute with battery
• Encoder resolution : 17 Bit
• Flange size square (LC) : 60 mm
• Shaft diameter  : 14 mm
• Weight : 1700 g

Details:

• Servo control method Analog : EtherCAT, MECHATROLINK II, Pulse train
• Drive supply voltage : 230 V single phase
• Rated output : 0.75 kW
• Rated speed : 3000 Rpm
• Rated torque : 2.4 Nm
• Peak torque : 7.1 Nm
• Encoder type : Incremental 
• Encoder resolution  : 20 Bit
• Flange size square (LC) : 80 mm
• Shaft diameter : 19 mm
• Weight  : 2300 g 

AC Motor Servomotor 3000 RPM 400W Absolute 230VAC

10 more rowsG5 series AC servo motor, 1.5 kW, 200 VAC, 3000 rpm, 4.77 Nm, Absolute encoder

CONTROL COREX-C-X3-11-ANNN-21.01-01RS-NN-NN

ctrlX OS operating system, EtherCAT master, PLC standard

The main features of the ctrlX CORE X3 at a glance:

- SoC Xilinx ZYNQ Ultrascale, ARM A53 Quadcore

- 2 GB RAM

- 4 GB eMMc

- 1 MBit Retain Data

- 3x 1-GBit-Ethernet interfaces

- modern industrial-grade Linux-based operating system ctrlX OS

- included App & licenses: EtherCAT master and PLC standard

Unpacked Weight: 0.482 kg